Redmond Chimney Pros logo

Duvall, King County

Masonry Repair (Crown / Repointing) in Duvall, WA

Crown work and repointing in Duvall begin at $475. A crown with hairline cracks can often be resurfaced at that level; one that has broken through needs to be recast, and repointing is priced by the area of joints to redo. The quote separates the two so you can see which part costs what.

Typical investment

From $475

  • Serving Duvall and the rest of our King County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Redmond, Sammamish, Carnation
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Masonry Repair (Crown / Repointing) in Duvall

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Duvall home — we'll point you to the right fix.

What we do

Other chimney services in Duvall

The same crew, the same written quote — for Duvall homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Duvall homes need masonry repair (crown / repointing)

Older houses are the minority in a town where the Census dates the median home to 2000. Duvall's comprehensive plan places older small-lot houses in Old Town, and the city counted about 58 percent of its units as built after 1989. A masonry stack on one of the older houses has had decades of wet winters working on its mortar.

Old Town brick and the homes that still heat with it

Among the four towns we serve, Duvall reports the largest share of homes heated chiefly by wood: 4.5 percent in the latest five-year Census estimates. The sample is small, and the survey only asks about the main fuel, so fireplaces used now and then are not in that number.

When the stack is masonry, regular fires put the crown and the upper joints through repeated heating and cooling. Soundness is one of three things NFPA 211, as quoted by CSIA, wants checked every year. Crumbling joints near the top are among the first things that check picks up, and repointing is the remedy.

Your masonry repair (crown / repointing) in Duvall: what's included

Every masonry repair (crown / repointing) we do in Duvall includes:

  • Crown inspected for cracks, slope and overhang
  • Resurfacing or full recast of the crown, as its state requires
  • Failed joints raked out to sound depth
  • New mortar packed and tooled to match the old profile
  • Bond break kept around the flue tile
  • Close-up photos of crown and joints, before and after

Signs you need masonry repair (crown / repointing) in Duvall

  • A cracked slab on top of the stack
  • Mortar you can scrape out with a fingernail
  • Gritty mortar dust gathering where the stack meets the roof
  • Moss or plants rooted in the joints
  • Damp brick days after the rain has stopped

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Duvall homes need it

The Western Regional Climate Center describes western Washington winters as rain on 20 to 25 days in each of the two wettest months, December and January, and no more than four to eight days a month that are clear or just partly cloudy. Mortar under that regime rarely dries out. Add nights below freezing, 58 a year on average at the Monroe station north of town, and saturated joints start to crumble from the face inward.

A masonry fireplace has no emission label, so bans hit it first

Stoves have an emission limit set by Ecology, and so do manufactured fireplaces. A masonry fireplace built on site has none, and no certification either. In practice that puts every open brick fireplace in the group that must stay unlit from Stage 1 of a Puget Sound Clean Air Agency ban.

None of that is a reason to neglect the stack. The masonry does not care whether a fire is allowed: rain enters a cracked crown on ban days as on any other. Repair timing should follow the weather, not the burn calendar.

Your masonry repair (crown / repointing) in Duvall, step by step

  1. 1

    Probe the joints

    We test mortar depth and hardness across each face and mark the runs that have failed.

  2. 2

    Decide on the crown

    Surface cracks get a bonded coating; a broken slab is removed and poured again with a drip edge.

  3. 3

    Rake and repoint

    Old mortar is cut back, dust is cleared, and fresh mortar goes in by hand.

  4. 4

    Let it cure

    We tell you how long to wait before lighting a fire, and leave the photo record.

Masonry Repair (Crown / Repointing) prices in Duvall

What this work is quoted at for Duvall homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Masonry Repair (Crown / Repointing) prices in Duvall — published rates, 2026
ServicePrice in DuvallWhat that covers
Masonry Repair (Crown / Repointing)From $475Crown work, repointing and tuckpointing by surface area
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney RepairFrom $425Masonry repair — brick and mortar, scoped after diagnosis

Ranges are what these jobs are quoted at in Duvall. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Around Duvall

Duvall is a hillside town above the Snoqualmie River, incorporated in 1913, with homes with a median build year of 2000, almost all of them built since 1980. We work every part of it — Old Town, the upper plateau included.

DuvallKing County, WA · 47.742, -121.986

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

A Redmond Chimney Pros technician pointing to the four steps of a visit

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Masonry Repair (Crown / Repointing) in Duvall — common questions

What does code say a chimney crown must do?

Washington's 2021 residential code (R1003.9.1) wants concrete, metal or stone on top of a masonry chimney. The slab has to slope so rain leaves it, end in a drip edge, and stay separated from each flue liner by a caulked bond break.

Why does the price start at $475?

That is the smallest crown or pointing job we take on with roof setup included. Bigger surfaces and taller stacks cost more, and the quote shows the measurements behind the figure.

Can moss be pressure-washed off the brick first?

We avoid it. Oregon State University Extension cautions that a pressure washer used wrongly can damage shingles; on soft mortar it also strips the joint. Moss is lifted by hand before repointing.

Get in touch

Book an inspection

Need your chimney checked in Duvall?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (425) 470-6533Book