Chimney Relining cost · Redmond & the East Side, WA
From $1,900
What we charge for chimney relining.
We charge from $1,900 for chimney relining in Redmond and the East Side. Full-length stainless liner, sized to the appliance. The exact figure is set in writing after the $99 plus tax inspection, credited toward an approved quote, and you approve it before any work starts.

What the price includes
What we charge for each service. Chimney Relining is highlighted.
| Service | What we charge | Typical East Side price | When you need it |
|---|---|---|---|
| Chimney Sweep | $189–$449 | $70–$350 | Annual maintenance, or you burn regularly and it has been a year |
| Chimney Inspection | $99 plus tax | $120–$844 | Buying or selling a house, after a chimney fire, or before a new appliance |
| Chimney Relining | From $1,900 | no East Side data published | Cracked clay liner, an unlined chimney, or fitting a stove or insert |
| Chimney Repair | From $425 | $113–$3,000 | Cracked bricks, open mortar joints, a leaning or spalling stack |
| Chimney Cap Installation | $235–$850 | no East Side data published | Missing or rusted cap, rain or animals getting into the flue |
| Masonry Repair (Crown / Repointing) | From $475 | $150–$300 | Cracked or crumbling crown, failing mortar joints across the stack |
| Chimney Waterproofing | $285–$790 | no East Side data published | White staining on the brick, or damp showing inside |
| Chimney Flashing Repair | $330–$1,500 | $300–$400 | Water stains on the ceiling around the chimney |
| Gas Fireplace Service | $189–$425 | no East Side data published | Annual service, or the unit will not light or stay lit |
| Creosote Removal | From $215 | no East Side data published | Several seasons since the last sweep, or a hard glaze in the flue |
| Dryer Vent Cleaning | $105–$265 | no East Side data published | Clothes need two cycles, or it has been over a year |
| Air Duct Cleaning | From $525 | $351–$408 | After a renovation, or after water damage |
Market rates observed on the East Side (King County, WA), surveyed October 4, 2026 — not our quote. Sources: Chimcare — Chimney Sweep in Redmond, WA, Homeyou — Air Duct Cleaning in Redmond, WA costs, Homeyou — Chimney Repair in Redmond, WA costs, Homeyou — Chimney Sweeping in Redmond, WA costs.
Published by others — not our quote
We searched for a price on this job published for Redmond, Sammamish, Duvall or Carnation by a company outside our network and came up empty, so what you see are nationwide figures. Not our quote.
$1,800–$4,000 per project
US national · Not our quote
National range; typical $2,500 with a flexible, double-wall liner in stainless steel (updated January 31, 2025); relining an existing chimney including removal $1,200–$4,600.
$1,200–$4,600 per project
US national · Not our quote
National, page updated 03/12/2026: liner 'rebuild' (replacement) $1,200–$4,600; liner repair $200–$5,000.
Every figure below is published by a third party. Not our quote.
A typical job, at our prices
A job at the bottom of our listed price for chimney relining — yours is set in writing after the inspection.
| Step | Cost |
|---|---|
| On-site inspectionPaid at the visit, credited toward the quote once you approve it | $99 |
| The chimney relining itselfBalance due after the inspection credit | $1,801 |
The total came to $1,900 before sales tax — our listed starting price for chimney relining, with the inspection counted inside it, not on top.
No Redmond or east King County price for chimney relining was found from a company outside our network, so we publish national figures only, not our quote: Fixr — Chimney Liner Installation Cost: $1,800–$4,000 per project (US national, accessed 2026-10-04); This Old House — How Much Does Chimney Repair Cost?: $1,200–$4,600 per project (US national, accessed 2026-10-04). Not our quote — what we charge is shown at the top of this page.
The 2021 Washington State Residential Code requires masonry chimneys to be lined (R1003.11) with clay flue lining complying with ASTM C315, listed chimney lining systems complying with UL 1777, or factory-built chimneys listed for installation within masonry chimneys. Masonry chimneys inside the building or within the exterior wall need 2 inches of airspace clearance to combustibles; chimneys entirely outside the exterior walls need 1 inch (R1003.18).
Common questions
The exact price for your chimney is set on site, in writing, after the $99 plus tax inspection. Our FAQ covers booking, the inspection and where we work.
Book your inspection — $99 plus tax on-site inspection, credited toward an approved quote.
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair