Redmond Chimney Pros logo

Chimney Flashing Repair cost · Redmond & the East Side, WA

How much does chimney flashing repair cost in Redmond, WA?

$330–$1,500

What we charge for chimney flashing repair.

Elsewhere on the East Side it typically runs $300–$400. Market rates observed on the East Side (King County, WA), surveyed October 4, 2026 — not our quote.

We charge $330–$1,500 for chimney flashing repair in Redmond and the East Side. Reseal at the low end, full flashing replacement at the high. The exact figure is set in writing after the $99 plus tax inspection, credited toward an approved quote, and you approve it before any work starts.

Chimney Flashing Repair in Washington — chimney flashing repair at the roofline
  • $330–$1,500 — what we charge for chimney flashing repair
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Written quote before any work starts — you approve the price

What the price includes

What you get for the price

  • Reseal at the low end, full flashing replacement at the high
  • A $99 plus tax on-site inspection first, credited toward an approved quote
  • A written, itemized quote with photos — you approve the price before any work starts

How it compares to the rest

What we charge for each service. Chimney Flashing Repair is highlighted.

What we charge for chimney services in Redmond and the East Side, WA
ServiceWhat we chargeTypical East Side priceWhen you need it
Chimney Sweep$189–$449$70–$350Annual maintenance, or you burn regularly and it has been a year
Chimney Inspection$99 plus tax$120–$844Buying or selling a house, after a chimney fire, or before a new appliance
Chimney ReliningFrom $1,900no East Side data publishedCracked clay liner, an unlined chimney, or fitting a stove or insert
Chimney RepairFrom $425$113–$3,000Cracked bricks, open mortar joints, a leaning or spalling stack
Chimney Cap Installation$235–$850no East Side data publishedMissing or rusted cap, rain or animals getting into the flue
Masonry Repair (Crown / Repointing)From $475$150–$300Cracked or crumbling crown, failing mortar joints across the stack
Chimney Waterproofing$285–$790no East Side data publishedWhite staining on the brick, or damp showing inside
Chimney Flashing Repair$330–$1,500$300–$400Water stains on the ceiling around the chimney
Gas Fireplace Service$189–$425no East Side data publishedAnnual service, or the unit will not light or stay lit
Creosote RemovalFrom $215no East Side data publishedSeveral seasons since the last sweep, or a hard glaze in the flue
Dryer Vent Cleaning$105–$265no East Side data publishedClothes need two cycles, or it has been over a year
Air Duct CleaningFrom $525$351–$408After a renovation, or after water damage

Market rates observed on the East Side (King County, WA), surveyed October 4, 2026 — not our quote. Sources: Chimcare — Chimney Sweep in Redmond, WA, Homeyou — Air Duct Cleaning in Redmond, WA costs, Homeyou — Chimney Repair in Redmond, WA costs, Homeyou — Chimney Sweeping in Redmond, WA costs.

Published by others — not our quote

What chimney flashing repair costs elsewhere in Redmond and east King County

Figures published by other companies and cost guides, local first, national for context. Not our quote.

  • $300–$400 per project

    Redmond/East King · Not our quote

    Homeyou Redmond and Sammamish: reseal cracks and replace flashings (Redmond page dated September 28, 2026).

  • $200–$300 per project

    US national · Not our quote

    Chimney flashing repair, national (updated January 31, 2025); flashing replacement $300–$800.

What moves the price

Every figure below is published by a third party. Not our quote.

Reseal with some new metal
Homeyou's Redmond and Sammamish pages give $300–$400 to reseal cracks and replace flashings.
Repair versus full replacement
Fixr's nationwide guide separates a flashing repair, $200–$300, from a full flashing replacement, $300–$800.

A typical job, at our prices

How the bill adds up

A job at the bottom of our listed price for chimney flashing repair — yours is set in writing after the inspection.

Typical chimney flashing repair job, priced on our own grid
StepCost
On-site inspectionPaid at the visit, credited toward the quote once you approve it$99
The chimney flashing repair itselfBalance due after the inspection credit$231

The total came to $330 before sales tax — our listed starting price for chimney flashing repair, with the inspection counted inside it, not on top.

Washington rules that apply

Chimney flashing repair cost — questions

What do other companies charge for chimney flashing repair?

Published figures, not our quote: Homeyou — Chimney Repair in Redmond, WA costs: $300–$400 per project (Redmond/East King, accessed 2026-10-04); Fixr — Chimney Repair Cost: $200–$300 per project (US national, accessed 2026-10-04). Not our quote — what we charge is shown at the top of this page.

Which chimneys must have a cricket behind them?

The 2021 Washington State Residential Code (R1003.20) requires a cricket on chimneys whose dimension parallel to the ridgeline is greater than 30 inches and that do not intersect the ridgeline.

Common questions

Questions about chimney flashing repair?

The exact price for your chimney is set on site, in writing, after the $99 plus tax inspection. Our FAQ covers booking, the inspection and where we work.

All our chimney pricesMore chimney questions, answered

Get in touch

Book an inspection

Ready for a clear, written chimney flashing repair quote?

Book your inspection — $99 plus tax on-site inspection, credited toward an approved quote.

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Flashing Repair in Redmond

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Call (425) 470-6533Book